Frequently Asked Questions

(Q) How do I program my Audioformz RGB remote?

(A)Power on, press both speed buttons simultaneously.  You should see a quick flash from the rings.  Make sure battery is good and remote not damaged.

]

The stock charging system consists of a stator (not an alternator) and basic battery.  A stator only charges with RPM, the less rpm the less charging.  Stock batteries are basic and sometimes to small to handle additional loads like a big stereo system.  We recommend upgrading the battery if you have a level 3 or above.  A maintenance charger while its parked will fully charge your battery as a stator will never fully charge a battery.  You will get longer life of the battery and better performance for your accessories.

In order to program a new or existing Audioformz RGB remote to an existing controller in the roof,  have power on, press both speed buttons simultaneously.  You should see a quick flash.  If you do not please check the battery or damage to the remote.

Load More